Model ID-C1012X Range 12mm Accuracy 0.02mm Contact Point Stem 8mm, M2.5 x 0.45 Thread Measuring Force Less than 0.9N Resolution *Switchable 0.01mm Type ISO/JIS

Mitutoyo ABSOLUTE Digimatic Indicator ID-C1012X, 12mm, Flat Back – 543-400B

ID-C Series 543 – Standard Type

Features:

• Similar in size to Series 2 dial indicators
• As compact as standard Series 2 dial indicators
• Large, easy-to-read LCD
• GO/NG judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/NG) can be displayed in full-size characters.
• The positive/negative count resulting from the spindle’s up/down movement can be toggled
• Internal calculations using the simple formula of [F(x)=Ax)] are available
• Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle “Absolute Position” from the origin at power-on. Also unlimited response speed eliminates over-speed errors.
• The ID-C indicator face can be rotated 330 to an appropriate angle for easy reading
• With SPC data output

Technical Data:

Accuracy 0.02mm Resolution 0.01mm Display LCD Length standard ABSOLUTE electrostatic capacitance type linear encoder Max. Response speed Unlimited Measuring force Refer to the list of specifications Battery SR44 (1 pc.), 938882 Battery life Approx. 5,000 hours under normal use Dust/Water protection level IP42 or IP53 (dust-proof type)

Function:

• Origin-set/Preset, Zeroset, GO/NG judgment, Counting direction switching, Power ON/OFF, Data output,inch/mm conversion (on inch/metric models only)
• Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error
• Internal calculations using the simple formula of [F(x)=Ax)] are available

See all Mitutoyo ABSOLUTE Digimatic Indicators ID-C Series 543, Standard Type