Mitutoyo Digimatic Indicator Signal ID-C, 12.7mm w/ Lug Back – 543-350

This is an externally-powered Digimatic Indicator with a N-ch open drain NG, OK, +NG output.

Features:

• Dust-protected and protected against splashing water, complying with IEC 60529 (equivalent to IP54)
• Measures MAX/MIN/RANGE (run-out value).
• Saves three different Preset and Tolerance settings.
• Fast measurement frequency mode (detection cycle 50times/s) for reliable measurement in the peak detection mode (MAX/MIN/RANGE)
• Calculation function Ax. Coefficient A freely definable, x = displacement of the plunger
• Analogue bar graph in the display (12 different scales switchable)
• GO/NG tolerance judgment function

Specifications:

Range 12.7mm Digital step 0.001 mm Accuracy 0.003 mm Measuring force 2.0N or less Scale Capacitance type, ABSOLUTE linear encoder Max. response speed Unlimited Stem 8 mm Measurement frequency 100 times/s(If the plunger speed >0,1 mm/s the peak value could not be displayed correctly.) Contact point Carbide ball, thread M 2.5 x 0.45 mm Alarm Counting value composition error, overflow error, tolerance limit setting error Power supply DC 5 – 24V Display LCD, character height 8 mm Delivered With signal cable 4 m. One end is fixed to the main unit. no connector is supplied for the other end. Signal output (+NG, OK, -NG) Yes Signal input No-voltage input,
(PRESET_RECALL/ZERO, HOLD_RESET) Yes PRESET (x3) Yes ZERO/ABS Yes GO/NG judgement Yes ON/OFF Yes Analogue measuring range switchable Yes GO/NG judgement via LED Yes Function lock Yes Counting direction switchable Yes Calculation function Yes GO/NG judgement on LCD Yes MAX/MIN/RANGE Yes Inch-Metric Metric