Mitutoyo ABSOLUTE Digimatic Indicator ID-C, 0.5″/12.7mm w/ Lug Back – 543-352

• With the max./min. value holding function, the signal ID-C can output the signal of the GO/NG judgment result against the peak values set. Substitute for the mechanical/electrical contact, the judgment is carried out by calculating the measurement data obtained. This provides high reliability with no deterioration of the contact point and volume adjustment.
• The signal can be output to an external device like a sequencer through the NPN open-collector.
• The GO/NG judgment result is also indicated by the green/red LED and the “<, O, >” signs on LCD.
• Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle “Absolute Position” from the origin at power-on.
• The Signal ID-C achieves the IP54 protection level to resist dust and contaminants for safe operation in harsh machine shop environments.

Technical Data:

Item Number 543-352 Model ID-C112JEX Range 0.5in / 12.7mm Accuracy 0.00012in Resolution .00005in / 0.001mm Type ANSI/AGD type, Stem dia 3/8in, 4-48 UNF Thread Display LCD Length standard ABSOLUTE electrostatic capacitance type linear encoder Max. response speed Unlimited Measuring force 2.0N or less Power supply DC 12 – 24V10% Dust/Water protection level IP54 Function Data output (NG/OK/NG signal, NPN open collector),
Remote control (hold-preset, preset-recall, zero-set),
Origin-set/Preset, Zeroset, GO/NG judgment,
Max/Min/Runout value holding,
Counting direction switching, PowerON/OFF,
inch/mm conversion (on inch/metric models only) Alarm Low voltage, Counting value composition error,
Over-flow error, Tolerance limit setting error