LPS Tapmatic #1 Gold Cutting Fluid, 16 oz.

LPS Tapmatic #1 Gold Cutting Fluid Suits Any Metal. Tapmatic #1 Gold Cutting Fluid manufactured by LPS consistently works the best with all metals alike, even with aluminum. Unlike other cutting fluids available in the market, with Tapmatic cutting fluid, you need to use only less of it to achieve greater results. Along with boosting tool life, it provides your workpieces with a long-lasting surface finish and luster as well. The #1 Gold cutting fluid (40320) can be best used for tapping works. However, it can also be used for all machining and metalworking tasks, such as drilling, milling, broaching, sawing, threading, reaming, etc. It smoothes your tools, results in decreased torque, and thus, makes the machining process efficient. The cutting fluid can effectively minimize the friction between the workpiece and the tool during machining. This also prevents heat generation at the cutting zone. LPS Tapmatic #1 Gold Cutting Fluid is environmentally friendly as it does not contain any traces of 1,1,1 trichloroethane or CFC. Therefore, the use of this cutting fluid does not cause ozone depletion. The fluid is free of chlorinated solvents or paraffin as well. Also, it does not comprise water, solvents, inactive fillers, etc. This gold-colored cutting fluid has a vapor pressure less than 0.05mm Hg at 20C and a flashpoint of 149C. Its density is less than 1, and the viscosity of the fluid is less than 20 mm2/s. You have to apply only a very little amount of this Tapmatic gold cutting fluid on the cutting area before you start machining with your tools. However, you have to use the product in a well-ventilated workplace and wear protective equipment during its application.

• LPS offers an eco-friendly cutting fluid, which is effective on all metal types.
• With a very little amount of the product, you can get excellent results.
• Tapmatic #1 Gold Cutting Fluid provides high lubricity to avoid friction in the cutting zone.
• Thus, the product enhances tool life and offers fine-finish surfaces on your workpieces.
• Tapmatic #1 Gold Cutting Fluid is totally free of CFC, and thus, the fluid does not harm the ozone layer.
• Chlorinated paraffin, solvents, etc. are not present in the fluid, and it does notcomprise water and inactive filters.