Keller TKO Pump/Skimmer, 25-200 gallon – TKO-10

Tramp Oil Separator for One Sump, 10 gallon separator

A Keller TKO Pump/Skimmer rapidly sweeps out tramp oil, cleans and aerates the entire sump.

Get these Benefits:

• Extended tool life, improved parts finish
• Smoke and odor eliminated
• Multiplied coolant life = Much less machine downtime, greatly reduced coolant purchase & disposal costs

With these exclusive Keller features:

• Patented permanent oil separating (coalescing) element, never needs changing
• Rugged high flow 1/2 air-operated pump provides rapid tramp oil removal, circulates & aerates entire sump
• Compact inlet device can access any pump
• No electricals
• Sets up in minutes Requires minimal operator attention

The self-priming air operated pump pulls the tramp oil/coolant mixture from the surface of the sump through the floating inlet device, then through a cartridge filter which removes any chips from the fluid. The oil/coolant mixture is then pumped through the patented Keller all-plastic separator element immersed in a separator tank. The cleaned coolant continuously returns to the sump. The oil layer collects on the top of the separator tank and is occasionally drained into a waste oil container, simply by opening the oil drain valve. No other operator attention is required.

Selecting and Installing a TKO Separator:

Three models of TKO Separators are offered, to satisfy any sump size. Each TKO Separator is shipped by UPS complete, ready for setup. The customer supplies only a 1/4 compressed air line. The unit may be set on the floor adjacent to the sump, or mounted on the machine tool using the CLO-1 magnetic frame (see photo).

Specifications:

Accessories:

CLO-1 – “Cling-On” frame with magnets, to mount TKO-6 to side of machine tool

R10-3150 – Replaceable filter element, 150 micron, 10 long

BA-0475 – Optional bag filter with 5 filter bags

RAP-25 – Pack of 5 25-micron filter bags for BA-0475

Additional Inlet Devices:

• # 555-05 – Compact floating inlet device
• # 555-06 – Fixed inlet device (Requires only 3″ diameter access hole)
• # 555-07 – Floating inlet device
• # 555-17 – Small floating inlet device

See all Keller TKO Pump/Skimmers & Accessories