Master Fluid Solutions TRIM SC520 Cutting and Grinding Semi-Synthetic Soluble Coolant – 5 Gallons – SC520/5

TRIM SC520 is a low-odor, low-cost, semi-synthetic and general purpose cutting and grinding fluid concentrate for the multi-material, multi-operational shop. SC520 uses a proven EP-additive package to control built-up edge, improve tool life and has the wetting and cooling characteristics necessary for superior machining results on high-speed milling and turning operations. It also controls chip welding on soft, gummy materials like aluminum.

• Good sump life in “stand-alone” machines.
• Low odor and mist.
• Effective in most grinding, sawing, drilling and CNC turning and milling operations by varying concentrations.
• Provides sufficient lubricity to do down-the-hole operations in aluminum, cast iron and most steels, including many stainless steels.
• Compatible with a very wide range of materials including cast iron, steels, copper and aluminum alloys as well as most plastics and composites.
• Low-to-moderate foam with normal “flood” coolant application.
• Rejects tramp oils rapidly for easy recycling with good sump life.
• Easily recycled or disposed of using conventional techniques and equipment.
• Country of Origin: U.S.A.

TECHNICAL DATA

• Recommended usage concentration in water: 4.0% – 10.0%.
• To help ensure the best possible working solution, add the required amount of concentrate to the required amount of water (never the reverse) and stir until uniformly mixed.
• Use premixed coolant as makeup to improve coolant performance and reduce coolant purchases. The makeup you select should balance the water evaporation rate with the coolant carryout rate.
• Use mineral-free water to improve sump life and corrosion inhibition while reducing carryoff and concentrate usage.